2D Functions

• Dragging symbols using the object handle in conjunction with legacy input methods also changed the z-value of the symbol

Interoperability

• DWG/DXF export - Symbol names with an * character could not be exported to DWG. This has been fixed
• DWG/DXF export - Layers with trailing space were not exported when printing to DWG

Interoperability

• DWG/DXF export - Fixed offset errors of gradient fills in polylines

References

• In isolated references, the arcs of polylines were not displayed in the correct orientation for some line types. This has been fixed
• Room stamps are again displayed directly in the reference manager

Cut

• Errors with multi-part cutting lines, e.g.: fixed for developments

System

• Interface - The UI resets after crashes. This has been fixed
• Grid - The grid no longer grows when cutting polylines
• Material assignments - scaling and visibility were not always imported correctly. This has been fixed

2D Functions

• The "Zero 2D symbols base/height" function now also searches nested symbols
• Input fields ("relatively dynamic" input method) are no longer visible when setting the reference point
• The reference point can be reached again using the key combination CTRL + left mouse button

Cut

• Improved cut view accuracy. This has a direct impact on the accuracy of dimension distances

References

• Auxiliary lines in the released reference are only displayed in the released area
• In released references, arcs are again displayed as round and no longer segmented, regardless of the line type used

System

• Reorganize - Rooms are no longer removed if the room stamp is not present

2D Functions

• Cut Polylines - The cut line always extends over the entire area of the polyline. The preview of the cutting line has been revised to clarify this
• Slice Polylines - Undo behaviour has been optimized
• Hatches - with the new function "Align Hatches" the starting point and the angle of an existing hatch can be redefined
• Polygon - Rectangles are again created with 2D lines by default and the "Centre" option is available again. Optionally, rectangles can be created as polylines

3D Functions

• 3D Line - With 3D input active, confirming the target coordinates via the ENTER key could cause a crash. This has been fixed

Architectural Construction

• Draw walls - the function "follow wall" only considered windows and doors. Breakthroughs and other wall openings are now also recognized

Evaluation/Reports

• Evaluation – The dialog 'Should slide XYZ be switched on?' when displaying elements in the drawing from the evaluation could not always be closed. This has been fixed
• Reports - Reports for windows only showed deductible window sizes. This has been corrected and all windows are now displayed again in the window reports

Views/Plot sheets

• When the sheet was rotated, an additional plan was created '$$OrthoRotated' when creating a plan in the plan display. This is no longer the case
• The 'Rotate by Angle' option is now saved to the sheet
• Plan sections in a drawing could produce disruptive vertical lines when the drawing area was rotated. This is no longer the case
• Plan sections and exempted references ignored the set section

System

• When creating a file, the entire path was displayed with the file name
• Updating the artboard when activating slides is now more reliable
• Closing the colour dialog could take a long time. This has been fixed
• The switching status of the free cursor is taken into account again. If the free cursor is not active, the cursor is always displayed at the end of a line
• Magnetic cursor (+ Shift key) caught unwanted plumb points on lines, auxiliary lines or snap tracks. Behaviour has been improved
• Using several E-Dongles at the same time could cause problems when starting SPIRIT. The correct license was then not found
• Object inspector - The properties of the element are also displayed when an element is selected again. Previously, the information was hidden

2D Functions

• Arrange - An infinite loop could occur when arranging elements. The cause has been fixed

Evaluation/Reports

• Legend - The legend is now displayed with all entries
• Polylines - The perimeter of polylines can now be evaluated with and without deduction

Interoperability

• DWG Import - The import could abort with the message "An invalid character was found in the text content". The cause has been fixed
• IFC Export – The apartment unit is correctly written back into the IFC file

Views/Plot sheets

• When you click the "Show print layout" button, the drawing area is updated directly
• Changing the plan order was incorrect. You can now move as often as you like using the corresponding buttons
• Changing a plan name in the dockable dialogue "View Manager" did not have an immediate effect in some cases in the dockable dialogue "Sheet Manager" docking dialog
• The angle of rotation of a plot section is now displayed and saved in degrees under "Plot section rotation" and can be adjusted here in the active plan
• The displacement of a plot section is now displayed in the currently set unit of measurement

Symbols

• The preview of symbols in TPL catalogues was sometimes incomplete. This has been fixed

Architectural Construction

• An already defined expansion structure in as-built drawings from older SPIRIT versions could cause the error "* * already exists" when opening. The cause has been fixed
• In individual cases, the assignment to the component files could be lost. Corrections have been made here to prevent this

Evaluation/Reports

• In some cases, the report service started with an error message. The cause has been corrected

Labelling

• When writing texts, in some cases the backspace key might not work correctly. The cause has been corrected

Printing

• Display errors could occur when creating PDF files created via "Print to PDF". The cause has been corrected

Interface

• After a crash it could happen that the custom interface was reset. Corrections have been made here to prevent this

Views/Plot sheets

• It was no longer possible to export a plan list. This has been fixed

Symbols

• When copying symbols via the clipboard, it could happen that they were not inserted correctly and were not visible. The cause has been corrected

System

• The error message "EListError" when changing drawings no longer occurs
• Dynamic input methods: after pressing the TAB key to change the input field, ortho mode stopped working. This has been fixed

2D Functions

• 2D walls - the wall thickness is no longer adjusted unintentionally
• 2D walls - the wall style file can be saved again
• Align – Texts are now stretched as well
• Stretching - stretching in large drawings has been significantly accelerated

Evaluation/Reports

• Viewing rooms from AVANTI has been improved
• Calling up the cost analysis in the pull-down menu led to a crash. This has been fixed

Printing

• Print To PDF - non-closed polylines with colour fills were sometimes output incorrectly. This has been fixed
• Print preview – the switches overlaid on 4K monitors. This has been fixed

Interface

• Dynamic cursor - when changing the input fields using the Tab key, the cursor position is no longer reset after a manual input
• Dynamic cursor - changing input fields using the Tab key followed by a right click led to an incorrect reference point. This has been fixed
• Dynamic cursor - entering the background colour of the input field is now applied immediately
• Explorer - the set file display (icons or list) is saved and retained permanently

System

• Views - after importing a view list, it could happen that some views could not be activated. This has been fixed
• Program start - when starting the program with the start assistant, it could happen that this was not operable. This has been fixed

2D Functions

• Move - The Arrange function can now be applied to any element on a slide
• Legend – The legend has been expanded to include cost elements, columns, slabs, niches and free components
• Polylines - The setting of the 'Decompose into Lines/Arcs' switch is retained
• Polylines - Edit holes by using the object handles enhanced
• Mirroring - Mirroring images now works in all situations
• Stretch - Improved performance in large drawings
• Polygon - The setting of the 'Explode' button in the Polygon menu is now preserved

Architectural Construction

• The base/height did not change when the room foils were switched

Labelling

• Dimension Editor - The set background colour was not adopted
• Dimension Editor - Left Offset and Right Offset were swapped
• Dimension Editor - Fixed icons
• Texts - Fixed display errors with texts with superscript '5'

 Interoperability

• The SKP import and SKP export were not possible. The reason for this was corrected

Printing

• Printing to DWG - Stamp variables are now all correctly exported to DWG
• Print server - The target directory could not be changed
• Print server - Contents from saved print job are loaded correctly again
• The variables for the file name when printing have been expanded to include the project designations

PDF import

• There could be a shift between the image display and snap points. Optimizations have been made here

• For "Import mode 2017" the options have been expanded to include "Resolution"

• For the import "Import PDF as JPG" the options have been expanded with"Resolution" and "Compression"

• When importing with the 2019 import mode, there are settings for texts.
  Texts can be imported "not at all", "in poor quality" or "as in the original".
  In the event of display problems after the import, changing the setting can lead to lead to an improvement

System

• Dockable dialogue "Layer Manager" - Fixed button labels
• Explorer and Projects dialogs now retain view settings
• o2c player support updated
• Fixed problems opening drawings (EOutOfMemory)
• Zip&Go - The function has been extended to pack settings (with directory structure or without). Comments can now also be stored or, if necessary, all embedded components can also be packed

2D Functions

• Offset - The magnetic cursor is now temporarily disabled
• Polylines - The 'Convert Hole' function in the context menu no longer worked. This has been fixed

Architectural Construction

• Rooms - When changing a room foil within the room dialog, the base/height did not change
• Walls - When a wall has been edited, the stop is no longer changed

Labelling

• Texts - Fixed display errors in text boxes. If the text is too small, SPIRIT displays the text as a box, these boxes were calculated incorrectly
• Texts - Font sizes were not transferred via format brush

Interoperability

• DWG Export - The scaling factor may be missing for text blocks

Printing

• When selecting the output names, the variables for 'Project Name' and 'Project Number' are now also available
• Print to PDF - some colours were not transferred correctly
• Print to PDF - large image files were not transferred to the PDF
• Print server - The selection of the target directory for plans can now also be changed later in the print manager

Symbols

• A function has been added to set all 2D elements to base and height 0 in symbols
• If the storage name of symbols had exactly 3 characters, the layer name was confused with the level when the layer was created
• Saving symbols to the network now works reliably

System

• Double-clicking on an S12-file did not open the drawing when SPIRIT was minimized

Architectural Construction

• In individual cases the assignment to the component files could be lost. Corrections have been made here to prevent this

Evaluation/Reports

• Legend - The legend is now displayed with all entries

Interoperability

• IFC Export – The apartment unit is correctly written back into the IFC file

Views/Plot sheets

• Print layouts could not be made back to plans. This now works by using the 'Show print layout' button and updating the plan or print layout

Symbols

• The preview of symbols in TPL catalogues was sometimes incomplete. This has been fixed

2D Functions

• Polylines - The setting of the 'Decompose into Lines/Arcs' switch is retained
• Polylines - Edit holes by using the object handles enhanced
• Polygon - The setting of the 'Explode' button in the Polygon menu is now preserved

Labelling

• Some texts were mirrored when stretching texts. The reason for this was corrected

Interoperability

• The SKP import and SKP export were not possible. The reason for this was corrected

System

• Dockable dialogue "Layer Manager" - Fixed button labels
• o2c player support updated
• Fixed problems opening drawings (EOutOfMemory)

2D Functions

• 2D windows and doors could no longer be deleted using the remove function when the sheet was rotated
• 2D walls could no longer be connected when the sheet was rotated
• Area+ and Length+ - Unit settings were not saved
• Offset - The magnetic cursor is now temporarily disabled
• Eyedropper - Elements that are on top of each other can now be selected better
• Polylines - hole function with rotated sheet did not work correctly
• Eraser stopped working on some drawing elements
• Scaler - Buttons in main context menu and menu overview were not working in sync
• Scaling - When cancelling the function, it could happen that scaling was used, which changed hatching

Architectural Construction

• Walls - When a wall has been edited, the stop is no longer changed
• Roof - When calling up the functions for editing a roof, the layer required for editing is now activated

Evaluation/Reports

• The Windows signal on every input has been disabled

Labelling

• Texts - Fixed display errors in text boxes. If the text is too small, SPIRIT displays the text as a box, these boxes were calculated incorrectly
• Texts - Font sizes were not transferred correctly using the format brush

Interoperability

• DWG Export - In some cases, the scaling factor was missing for text blocks
• DWG import - In the case of symbols (blocks) with the colour assignment from block or from layer, the colour index is appended to the symbol name. As a result, the same blocks were given different names but were displayed with the correct colour

Printing

• The system path "Print files" is determined dynamically again

Interface

• Object Inspector - selection of variables is available again

References

• References - When highlighting references, coloured areas were not taken into account in the layout
• References - References were no longer cached on load/save

Symbols

• A function has been added to set all 2D elements to base and height 0 in symbols
• If the storage name of symbols had exactly 3 characters, the layer name was confused with the level when the layer was created

System

• Open drawings - double click on S12 only works the first time to start and then not anymore. This has been corrected
• User Profiles - In some cases the user profiles were not saved correctly
• Added new key macros for setting pen table, detailing scale and plot scale:

• 26373^<Name>$=SelectPenTable
• 26374^<Name>$=SelectZacDetailLevel
• 26375^<Name>$=SelectPlotScale

• Examples:
  
  • 26373^draft$ choses the pen table "draft"
  • 26375^1:50$ choses the plot scale 1:50

2D Functions

• 2D Dimension - Manually entered dimension text was converted to the unit of measurement
• Display of the rubber band now also works when the screen section is moved
• Move - The object handle to move elements required one click too many. This has been corrected
• Filter - The colour filter has been restored to the old choices

Interoperability

• SKP import - Importing SketchUp 2019 files is now possible

Printing

• Sheet size was limited to 3276mm. This limit has been removed
• Custom sheet sizes were not preserved in some cases. This has been improved
• Sheet frames and plan headers could be missing in cropped references and in paper space. This has been fixed
• Print to PDF – The default for the output path is now always the folder in which the drawing is located
• Print server - The forced saving of drawings when calling up the print manager is no longer executed. It is only saved if the external process for PDF printing is used and only open files are saved
• Print server - The dialog can no longer be minimized. When minimized, SPIRIT looked like it had crashed

Interface

• Dockable dialogue "Layer Manager" - Moving layers to the top of the layer stack now works as intended
• Dockable dialogue "Object Inspector" - With multiple selection, different values are marked accordingly in the object inspector

References

• Importing references written on a locked slide caused the import to stop. This has been fixed

Symbols

• Symbols can now also be pointed out with a specific colour
• Symbol reference points were no longer considered in selection. This has been fixed

2D Functions

• Dynamic contour tracking is also possible with hatches and fills

3D Functions

• 3D viewer - A crash could occur when the 3D viewer was active. This has been fixed
• 3D orbit - The dynamic cursor guides on cylinders are now correctly positioned

Evaluation/Reports

• Finishing - Existing designations in the finishing are now correctly taken over from old drawings
• Evaluation - With active backtracking, double-clicking on an element can be used to zoom in on this in the drawing area
• Report service - Some templates for the report service have been updated

Labelling

• Dimensioning - With non-associative linear dimensioning, exponents and special characters are correctly adopted

Interoperability

• IFC Export - Sweep-bodies will be exported correctly to IFC
  
• IFC import - Fixed 'Index out of bounds' error

Interface

• Dockable dialogue "Levels" - New levels can now also be created when the dialog is minimized

References

• Reference Manager - The layer list can now be grouped

System

• Backup Control - Further corrections to 'BackupLog.txt'
• Heats - The "2D" heats have been updated

2D Functions

• Snapping - There could be problems with snapping on small elements. This has been fixed

Architectural Construction

• Expansion - There is a separate dialog with additional functions for construction phases and residential units

Evaluation/Reports

• Evaluation - The dialogue for the reports can now remain open while you work

Labelling

• Dimensioning - Exaggerations in text completion now work correctly
• Legend - The process of creating and subsequently editing the legend has been improved

Interoperability

• DWG import - symbol variable contents were not visible. This has been fixed

References

• Crashes could occur when importing text references. The cause of this has been corrected

Interface

• Explorer - Large preview active again for symbols
• Object Inspector - display of vertical faces for polylines now works correctly
• It could happen that your own icon bars were reset. The cause for this has been corrected

System

• Display - Fixed issues with monitors with different resolutions
• Options - The switch for scaling was not taken into account
• Backup control - It could happen that the 'BackupLog.txt' is not generated correctly. This has been fixed

2D Functions

• Insert image - When inserting images, the user can decide whether the image should be placed directly or the size should be adjusted with a fixed or free aspect ratio
• Eyedropper - Applies all values of a room even if the room stamp has been selected
• Plan frame - Inserting a header symbol was incorrectly previewed (correctly placed but incorrect preview)
• Polylines - The old possibility to create polylines in the edit menu has been removed because this function is already available directly in the polyline menu
• Stretch - After a stretch operation, the room stamps were hidden - this has been corrected

Architectural Construction

• Detaching rooms via 'Follow wall' works correctly again if walls are on different construction layers
• 'Level' is now available as a space stamp variable and can replace 'Order'
• 'No construction phase' or 'No residential unit' can now also be selected for the construction phase and residential unit
• The 'Extension' function in the room menu has been moved to 'F2 Extension' and is therefore more present
• When inserting openings in composite walls, the heights of the wall layers are now taken into account
• The display of the area type is now uniform in the evaluation, object inspector or on the room itself

Evaluation/Reports

• Updating the evaluation could lead to an error message. The cause for this has been corrected
• The tedious updating of the evaluation using the 'Open node' operation has been significantly accelerated
• The 'Visible layers' and 'Parts only' switches are now always interpreted
• Column height and column volume are now also available for the reports

Labelling

• Texts/Rotated Crosshairs - When using 'Define All', the rotation angle of the crosshairs was calculated with the angle of the text. This was already correct for 'Define everything' in the context menu or for the pipette

Print server

• Pasting text files no longer changes the Print Manager output path

Interface

• Object Inspector - Input was blocked when using the arrow key to access a read-only field
• Object Inspector - No acquisition of colour data if the object inspector was minimized
• Object inspector - If several elements are selected, 'different' is now displayed for different values
• It could happen that your own icon bars were reset. The cause for this has been corrected

Interoperability

• PDF import - Some PDF files could not be imported, a crash occurred. This has been corrected

Symbols

• Symbol catalogues - After changing the catalogue, the wrong symbols are no longer displayed

System

• Display - Switching to the large icons only occurs when the screen scaling is at least 125%
• Display - SPIRIT now always opens on the screen it was closed on
• Backup Control - Access errors to the 'BackupLog.txt' file no longer occur
• Start assistant - the start assistant can be deactivated again

2D Functions

• Elements on read-only slides no longer display item handles when selected
• With Length+, the function to insert the measurement results into the drawing has been added
• With the dynamic input types, the first time the Y value was used, it was not fixed correctly. This has been corrected
• With the classic input types, the ortho mode did not work as intended. This has been corrected

Architectural Construction

• When identifying via the room stamp, only the gross room line is selected and displayed in the object inspector
• Built-in elements in multi-layer walls are now deleted from all layers with one click

Evaluation/Reports

• When using house numbers of the type 7-11, this number was changed into a date. This no longer happens
• When changing part nodes, the updateable overview was not immediately filled. This has been corrected
• In the report dialog there is now a separator between selection and display of the reports so that you can adjust the areas according to your needs
• The clear room height is now also available in the evaluation

Labelling

• Text blocks - Text blocks were not displayed on some workstations, they are displayed correctly again
• Dimensioning - If the available space is too small to draw arrows, they are now drawn on the outside

Interoperability

• DWG import - The import of special characters in variables has been improved
• Print to DWG - Prefix and suffix are now transferred correctly

System

• 3D Viewer - If the 3D Viewer was maximized when closing SPIRIT, this led to an error message when SPIRIT was restarted. This has been corrected
• File Manager - Redefining symbols now applies all changes